Best full tower PC cases 2024 – our top 5 big cases for your next build
We find the best full tower PC case on the market!
WePC is reader-supported. When you buy through links on our site, we may earn an affiliate commission. Prices subject to change. Learn more
After the best full tower PC case then you don’t have to look further. We’ve picked out the top selection of the biggest cases you can buy if you’re looking to fit everything into one build and some more. It will let you fill it with everything you might desire not just the core components, so let’s see the selection.
Although they might have fallen out of popularity to the likes of mid-size PC cases, however, that doesn’t stop some from enjoying the sheer size of some options. We keep this page updated with newer options and offer a good range of options you may consider. These options will certainly even fit the RTX 4090 as the largest card, in which case you don’t have to worry about much. Even allowing for some great watercooling, you can easily fit a lot of potential throughout.
Today’s best PC case deals
- Corsair 5000D – Save 17% NOW!
- Lian Li V3000 Plus White GGF Edition Full Tower case – Save 55% NOW!
- be quiet! Dark Base PRO 901 Black computer case – Save 12% NOW!
- Thermaltake Core P3 Pro E-ATX Tempered Glass Mid Tower – Save 27% NOW!
- Vetroo AL600 Pink Mid-Tower ATX PC Gaming Case – Save 21% NOW!
- LIAN LI High Airflow ATX PC Case, RGB Gaming Computer Case, Mesh Front Panel Mid-Tower Chassis – Save 31% NOW!
- Antec NX410 ATX Mid-Tower Case, Tempered Glass Side Panel, Full Side View – Save 18% NOW!
- MSI MPG GUNGNIR 110R – Premium Mid-Tower Gaming PC Case – Tempered Glass Side Panel – Save 27% NOW!
- Cooler Master NR200 SFF Small Form Factor Mini-ITX Case, Vented Panels – Save 41% NOW!
- Corsair iCUE 5000D RGB Airflow Mid-Tower Case – 3X AF120 RGB Elite Fans – Save 23% NOW!
Best full tower case
Corsair 7000D Airflow
Corsair 7000D Airflow
Type
Full-tower
Motherboard Support
E-ATX, ATX, mATX, Mini-ITX
Dimensions
600mm x 550mm x 248mm
Included Fans
3 x Corsair 140mm AirGuide fans
- Spacious interior
- Excellent airflow
- Visually beautiiful
- Modular
- Very heavy and quite expensive
Corsair has been expanding its lineup, and even the popular range of 4000D cases has been upgraded. With a design for airflow, it truly brings some great design and features to the full tower design with the 7000D Airflow.
It supports the range of motherboards of E-ATX, ATX, mATX, and Mini-ITX. The whole options will be able to fit unsurprisingly, it does come in slightly smaller than the other options. With only a 600mm height and a more slim build, it does become a more handy option even at its already big size.
It comes with three fans already, so if you’re not planning on adding more you get a good cooling option already. As for the back of it, you get another panel covering your cables. With the first one providing mesh holes for any fans you might mount on the side, you get a lot of flexibility with the whole build.
The case also supports eight expansion slots and three vertical ones, giving you flexibility to how many cards you’re adding in and how you mount them. Whilst for the storage capabilities, you can fit six 3-inch HDDs, and four 2.5-inch SSDs. With radiators and fans get a lot of space too, with the full range of 120 to 480mm radiator compatibility.
Read our full 7000D review for more.
Corsair Obsidian 1000D
Corsair Obsidian 1000D
Motherboard Support
E-ATX, ATX, Micro-ATX, Mini-ITX, SSI EEB
Dimensions (HxWxD)
695.96 x 307.34 x 693.42mm
Drive Bays
11
Included/Supported Case Fans
4 included, supports 13 total
- It can support any build
- E-ATX to Mini-ITX compatibility
- Dual 480mm front radiator support
- Can house two builds
- Great cooling performance
- Heavy
- Quite expensive
The Corsair Obsidian 1000D is one of the largest full-tower cases featured in our roundup. Its gigantic size has warranted the nickname ‘super tower’ and it is easy to see why.
It supports Extended ATX, ATX, Micro-ATX, Mini-ITX, and SSI EEB. Standing nearly 700mm tall, this case is a heavy beast and should only be considered for the biggest of builds. Its humongous interior has enough room to accommodate up to 13 case fans (8 120mm fans can fit in the front of the case alone) and up to four radiators, all at the same time.
The 1000D features a special triple-chamber design with convenient hinged glass panels on the side. The main feature of this full tower case is the fact it can house an E-ATX build and a mini-ITX build at the same time. The larger E-ATX/ATX build features in your standard spot on the back panel, whereas the mini build is housed on the PSU shroud.
The case’s exterior is surrounded by tempered glass. The top has two brushed aluminum trims that frame the glass nicely. The front offers plenty of space for air intake through the dust filter. Looking at the back panel of the case we find it has seven expansion slots for multiple cards.
Storage capacity is also impressive, as the case has enough room to fit five 3.5-inch HDDs and six 2.5-inch SSDs. Traditional 3.5-inch hard drives and 2.5-inch solid-state drives each have their own storage chamber, both of which are located next to the PSU shroud. You’ll find space for two power supplies under the shroud for those who want to go for the dual-build option.
The front I/O panel has RGB lighting with built-in smart lighting and Corsair’s Commander Pro fan controller. The fan /lighting controllers allow you to control up to six PWM fans and two RGB LED strips, in addition to having four temperature probes. With its insane number of mountable fans and RGB lighting options, this is one of the best full tower cases on the market.
Thermaltake View 71 Tempered Glass RGB
Thermaltake View 71 Tempered Glass RGB
Type
Full Tower
Motherboard Support
Mini-ATX, Micro-ATX, ATX, E-ATX
Dimensions (HxWxD)
592 x 274 x 577 mm
Included Fans
3 x 140mm RGB fans
- Some of the nicest aesthetics for a case
- Great airflow
- Keeps temps low for a fully tempered glass chassis
- Side panels feature hinges (more convenient)
- Price
- No PCI-e extension cable
- Heavy
- Not the best cable management options
As we mentioned above, Thermaltake is no stranger when it comes to creating some of the best PC cases in today’s market. This, however, is one of their finest examples to date. The View 71 comes equipped with a stunning design accentuated by four premium 5mm thick tempered glass panels (front/both sides/roof). The tempered glass works extremely well with the RGB fans that come equipped with this case, whilst leaving nothing to the imagination as far as internal components are concerned.
The View 71 is a fine choice for enthusiasts looking to show off their components. Behind the tinted glass, you will find a tonne of features geared towards aesthetics and build assembly. Users will be treated to a vertical GPU mount at the front of the case, which helps display your GPU. Furthermore, Thermaltake has equipped this case with the option to mount an AIO cooler on the motherboard tray (next to the front fans). This is a fairly new design feature that we haven’t seen in many cases in the past.
The motherboard tray has the ability to house the most popular motherboard form factors, including E-ATX, ATX, Micro-ATX, and Mini-ITX – with the latter feeling a little silly if the truth be told. As far as cooling options are concerned, you’ll be able to customize the fan setup in full thanks to a variety of mounting options found in the front, roof, rear, and bottom panels. Numerous hard drives won’t cause this case problem either, as it comes with a tonne of pre-installed drive trays right out of the box.
One of the big selling points of this PC case has to be the water-cooling compatibility it supports. Inside, you have enough room to mount even the most elaborate of water-cooling loops with three external grommets at the rear. Oh, and the side panels are on nicely manufactured hinges too. Always a plus.
See the full review of Thermaltake View 71 here.
Phanteks Enthoo Pro Tempered Glass
Phanteks Enthoo Pro Tempered Glass
Motherboard Support
E-ATX, ATX, uATX, mitx, SSI EEB
Dimensions (HxWxD)
536 x 235 x 551mm
Drive Bays
12
Included/Supported Case Fans
3 included, supports 8 total
- 2 x 120mm + 1 x 140mm fans included
- Great value
- PSU shroud and rubber grommets to hide cables
- Tempered glass side panel
- Good radiator support
- No internal LED lighting included
The Phanteks Enthoo Pro TG edition is a damn good case for the price, and it was an easy budget pick. The case has been designed with performance in mind, maximizing airflow with the sheer amount of mounted fans it can cope with and plenty of room for a custom water-cooled setup. Unlike the previous version, this one now sports a tempered glass side panel, adding some serious style points to the edition.
This full-tower case has plenty of room and can hold 6 x 3,5″ drives and 3 x 5.25 drives. The case is designed to support water cooling and supports a 1 x 360mm radiator at the top of the case and a 240mm to at the front. The drive bays pop out for an extra room with your custom build too.
On the back panel, we see plenty of room for cable management, rubber grommets, and included velcro straps to tie everything down. The cases are extremely user-friendly and a dream to build in, making it ideal for custom builds or strenuous large system builds.
The case comes with magnetic dust filters, which some prefer due to how easy they come on and off, but it is worth noting they are of low quality when you compare it with some of the Fractal Design ones. A great feature of the case is actually something quite simple, and that is its hinged side panel door. This may not seem like the best thing in the world, but it gives you easy access to your system when you need it without the need of having to slide that panel on and off.
The construction is solid, and you know you are getting a quality product from Phanteks as they are well established in the case manufacturing business. Overall a great choice, and if you like understated and simple yet highly functional designs, this could be perfect.
be quiet! Dark Base Pro 900
be quiet! Dark Base Pro 900
Motherboard Support
E-ATX, ATX, Micro-ATX, Mini-ITX
Dimensions (HxWxD)
586 x 243 x 586mm
Drive Bays
17
Included/Supported Case Fans
3 included, supports 10 total
- Solid construction
- Great acoustic performance
- Attractive design
- Modular design
- Cable management isn’t the best
Be quiet! Dark Base Pro 900 is enclosed by a steel frame with orange accents between the beveled edges and supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards. Flexibility is a common theme here, as the case has plenty of cooling options, and there is some modularity.
Tinted tempered glass covers the left side panel of the chassis, adding to the case’s visually pleasing design. The bottom of the case lacks ventilation, but there are two internal fan mounts that draw in cool air from between the two panels.
The motherboard tray can be installed at different heights on either side of the case. Dropping the tray one hole down still provides enough space for a single slot card to be installed at the bottom of the board. The HDD storage system is also an area you can customize for your specific building needs.
The motherboard side panel has a hidden fan mount that can accommodate two 120mm fans. Noise-canceling foam within the Dark Base Pro 900 reduces fan vibrations and aids the silent nature of the case. The case ships with three Silent Wings PWM case fans pre-installed, but it has ten fan mounting locations in total.
This silent beast also supports water-cooling radiators, from 120mm all the way up to 420mm, and radiators can be mounted on the top, bottom, or front of the case. Whether you want silence or not, this case is perfect for beginners and enthusiasts alike.
Are full towers better for performance?
With all the space that full tower cases offer there is a lot of performance available to the PC you build in it. With so much space for cooling, these tall towers are certainly beneficial if you’re focused on keeping the temperatures down. Be it your GPU or CPU, you can fit a lot of fans or liquid options to provide your components with adequate air.
As you keep temps down, you prevent any throttling and loss of performance and keep your performance up there and long-lasting. Although it might not directly improve your framerate one-to-one, you might enjoy a better time than those in a constrictive MATX case might see as it limits airflow and keeps heat inside.
What is the disadvantage of a full tower case?
There are plenty of disadvantages to a full tower case. The main reason, and likely why they aren’t as popular is the sheer size of them. They are the biggest and heaviest options which may make it rather cumbersome and annoying to build in. Unless you plan on just sitting down on your PC and leaving it, it might be rather troublesome to move again. It also comes in at a much higher cost, with more materials inside and the extra work to move them they come in at a higher cost.
Depending on your setup of cooling, it may come in noisier. With such a high count you have a lot more air moving that might be annoying to listen to. If you don’t set up your fans correctly you could find dead air inside that heats up but doesn’t move and can cause thermal issues.
How big is a full tower PC case?
Full tower PC cases are the largest cases available to purchase. When it comes to how large these cases are it is difficult to pinpoint an exact number. The actual size will vary depending on which make and model you purchase. On average, a full tower PC case tends to be around 8 inches by 20 inches. However, some can be slightly larger or slightly smaller than this.
Full-tower PC cases are great because they allow you to have complete control over the components that you choose. There is plenty of space for upgrades, and you can purchase larger components without having to worry about their size. When comparing a full tower PC case to a standard size, there is a jump in the size, and if you are short on space, this may not be the most suitable option for you.
Is a full tower case worth it?
Whether full tower cases are worth it is down to the individual. The majority of gamers will tend to have a preference over the size of the case they choose. It is worth keeping in mind that a full tower PC case is large, and it will take up a significant amount of space. This is why many gamers opt for the middle, standard option.
However, a full tower case is worth purchasing if you want complete creative control over your PC. It allows you to use larger-sized components and will give you extra space to add additional cooling systems such as liquid cooling and fans. In general larger PC cases do tend to have better airflow too, which is a great bonus. It all depends on the components you are planning on including in your build and whether they are worth it.
